View Single Post
Old 02-07-2021, 05:41 PM
KPH KPH is offline
Join Date: Jan 2014
Posts: 76

I finally got around in trying a fix to the door problem that I think will solve the problem. The latch just don't come up high enough to latch good on the original door or the replacement. What I did was to pry the latch up just a little, not to much then heated it with a heat gun just enough to soften the plastic at the latch. Now you have to be carefully not to heat it too much a hairdryer mite work better. Let it cool and the latch stays up just fine. The door is tight, it is one of those things you have to be careful and not over do it.
Reply With Quote