PDA

View Full Version : Decoy/Caller interface problems


madrabbit
10-08-2011, 05:29 PM
I just picked up a Black Jack at the Redhead store to go with my Scorpion X1-B and my Spitfire. I use the same cable as I use to program my remotes to connect the decoy to the caller- a 3.5mm male to male patch cord, which is what the "instructions" call for.
Neither remote does anything to the decoy but if I unplug the cable the decoy dies. I can'tfind anything in my caller manual about hidden switches or anything, just a bit about the decoy not working if the plolarity is reversed, but being all Foxpro they should all work together right?
Any ideas or tips would be appreciated. Thanks.

callcrazyaz
10-09-2011, 02:02 PM
Are you sure you are using the AUG.jack and not the speaker output jack ?

FPScott
10-10-2011, 08:28 AM
madrabbit:

Give us a call and we can get this squared away in just a few minutes.
717-248-2507

madrabbit
10-10-2011, 08:38 AM
Scott-
Thanks, I'll be in touch after the weekend.
Eric

yoteslayer11
02-28-2012, 09:01 PM
I bought a spitfire and got it and it didnt work contacted the place i bought it from and they sent me another one but i cant control it beyond 50 yards and i read about these guys controlling them from a 100 plus with decoys im just running straight caller no extenal speaker or decoy yet is this max yardage or do i have a poor remote or should a switch to a different battery using akaline double a and 9v in remote. Thanks

FPScott
02-29-2012, 01:40 PM
yoteslayer11:

To get maximum range out of your caller you will want to get the caller up off of the ground 1-3 feet if possible, keep the top of the remote control pointed upwards and you need to always maintain a good clear line of sight.

yoteslayer11
03-01-2012, 12:23 PM
Scott Thank you ill give that a try

yoteslayer11
03-06-2012, 02:03 PM
Scott mounted the spitfire to a adjustable shootin stick I had laying around works with no problem now thanks again