PDA

View Full Version : spitfire and tx24


depperson
01-15-2011, 12:29 AM
can not transfer new play list from spitfire to the tx24 remote. plug the aux cord in and it gets stuck at "turn caller on". Any suggestions?

NSHunter
01-15-2011, 05:12 AM
Did you happen to see this link ,Not sure if it is the same problem your having

http://forum.gofoxpro.com/fp_forums/showthread.php?t=2769

depperson
01-15-2011, 11:00 AM
the only thing i see that might be a problem is i have a 4gb sd card

wheelie
01-19-2011, 11:59 AM
Says to have a 2 gig card, name it SP1 and try it.if not get a 2 gig card. Sounds have to be named 000 to 023.

calledin
03-28-2011, 06:25 PM
How do you rename them. When I pull them down and open it wont let me backspace and rename the actual sound file, just rename the promt file? any help?

YOTERS DEN
03-29-2011, 06:44 AM
New Micro SD cards need to be formatted in "FAT32"

HTH

FPScott
03-29-2011, 08:42 AM
Be sure the TX24 and Spitfire are turned off before you attach the cable. Check to make sure the cable is a stereo cable and not a mono cable. The stereo cable will have 2 black rings around each male end. If you only see one ring then it is mono and will not work. The fact that it is staying on Turn on Caller would indicate that no signal is coming through the cable. Even though you have the caller turned on, the remote is still waiting for that signal.