Go Back   FOXPRO Forums > FOXPRO Sounds > Sound Reports

Sound Reports Having a lot of success with a particular sound? Post in here to share what sounds are hot and which ones are not! Also, a great place to share some of your favorite FOXPRO Foxcast sequences!

Thread Tools Display Modes
Old 06-26-2011, 02:24 PM
mert mert is offline
Junior Member
Join Date: Jun 2011
Posts: 6
Default need some seq help

how can i load some seq on my fury?
how can i create some seq?
any1 has any good seq to share for coyotes, foxes , bobcats?
Reply With Quote
Old 06-27-2011, 11:25 AM
FPScott's Avatar
FPScott FPScott is offline
FOXPRO Technical Support
Join Date: Apr 2010
Location: Lewistown, PA
Posts: 218

You will want to check out the FOXPRO FOXCAST sequence generator at the link below. This will allow you to create your own sequences in a fill in the blank fashion.

FOXPRO Service Dept.
Reply With Quote
Old 12-06-2011, 08:43 PM
Coyote_Hunter's Avatar
Coyote_Hunter Coyote_Hunter is offline
Join Date: Dec 2011
Location: Glendale, AZ
Posts: 98

A sequence can be created with a text editor.

Then just save it directly to the "flash" memory (the drive letter that your computer designated as your FoxPro, don't use the programming utility) as S00, S01, S02, S03...S09.

See page 15 of the manual http://www.gofoxpro.com/resources/ma...O_FURY_GX7.pdf
Reply With Quote
Old 12-06-2011, 09:23 PM
SkyPup's Avatar
SkyPup SkyPup is offline
Senior Member
Join Date: Aug 2011
Location: North Central Florida
Posts: 1,541
Thumbs up

Thanks for the great information and link to the auto-sequence generator, I just made a couple for my Prairie Blaster.
2-Prairie Blasters + SP-FR1 Ext Speaker
FireStorm + SP-55 Ext Speaker
SpitFire & Jack-In-Box & Jack Attack
2-SIG 556 Commandos Leopold VX-R 1-4X & Eotech
T/C Contender Custom 1:7" Twist 20" Barrel
Redfield 3-9X50mm
Handloaded 5.56mm OTM Varmit Killin' Ammo
Immunizing your Coyotes won't work.....
Reply With Quote
Old 11-13-2013, 02:55 PM
officework13 officework13 is offline
Junior Member
Join Date: Sep 2012
Posts: 2

auto sequence generator question.
i played with it a bit last day. honestly much easier to use notepad, unless you do not know the codes and what they mean (which are in the manual).

this is due to my 2 gripes with the generator. (well 1)
1. i have not figured out how to edit an entry once it is created and have had to reset the entire sequence once midway done. example. suppose you create your sequence only to realize that you forgot to put in a pause, now you have to redo the entire thing. If using notepad, you simply add a line for the pause.

2. this is what i had really expected of the generator, and that would be the duration calculator, which could have shown the calculated time for each file and the total duration. However, it was not until right this second, while typing this, that identifying the individual sound duration is not possible b/c the sequence is simply referring to a sound location, not an actual sound. such that if you change your sound numbering you change the sound in the sequence. (anyway, my gripe is a no longer relevant, but i decided i would leave it here as i expect others have this same gripe).
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 04:47 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
vBulletin Skin by vBSkins.com
Customized for FOXPRO Inc.