Go Back   FOXPRO Forums > FOXPRO Sounds > Programming Help

Programming Help Having trouble programming your FOXPRO game call? Consider yourself to be a programming expert? Visit this forum to get assistance or to share advice with others.

Reply
 
Thread Tools Display Modes
  #1  
Old 12-18-2009, 09:58 AM
Rick James Rick James is offline
Junior Member
 
Join Date: Dec 2009
Posts: 2
Default SD Card and programming issues........

Is it true that my Spitfire will not work with a micro SD card bigger than 1gb?

I've got a 2gb (the smallest I could find) and the programming software won't recognize it. If I drag/drop the files with proper naming schemes onto the card, the remote won't recognize them when I try to synch.

Is this due to the card size? I've followed the directions to a T, and I'm able to recognize and swap files on the micro SD card that came with the caller, but not on the newer card.

Any thoughts?
Reply With Quote
  #2  
Old 12-19-2009, 08:14 AM
Mardog4's Avatar
Mardog4 Mardog4 is offline
Member
 
Join Date: Oct 2009
Location: Oregon coast
Posts: 51
Default

Did you format your card?
Reply With Quote
  #3  
Old 12-20-2009, 10:42 PM
Rick James Rick James is offline
Junior Member
 
Join Date: Dec 2009
Posts: 2
Default

Multiple times in both available formats.

I ordered a pair of 1gb cards off Amazon.com, will try again once those get here.
Reply With Quote
  #4  
Old 12-20-2009, 10:48 PM
Weasel's Avatar
Weasel Weasel is offline
Moderator
 
Join Date: Oct 2009
Location: SW Utah
Posts: 4,865
Default

You might try calling Foxpro. You just might be able to use your 2gb cards????
__________________
Please Visit - Weasel Brand Game Calls and Accessories
Reply With Quote
  #5  
Old 12-28-2009, 06:56 AM
KDIXER KDIXER is offline
Junior Member
 
Join Date: Dec 2009
Posts: 8
Default

I purchased a spare Micro SD card for my Spitfire. To get it to work I had to reformat it. I had to format it to the FAT 32 file system. You also have to rename the card to "SP1". That is the only way the program will recognize it. You can copy and paste sounds to the card as well as long as they are numbered right as you have stated. I also made sure to copy the label utility over to the new card as well. Not sure if it is necessary but you may try it if all else fails. I tried everything before I eventually formatted it to FAT 32. And that did the trick.

The program would install the sounds after I renamed the card SP1. But it would not comunicate with the remote until I formatted it to FAT32.

I am using a 512MB card because that is what size came with the unit. I suspect card capacity would be irrelevant. 3
Reply With Quote
  #6  
Old 12-28-2009, 12:26 PM
Weasel's Avatar
Weasel Weasel is offline
Moderator
 
Join Date: Oct 2009
Location: SW Utah
Posts: 4,865
Default

Welcome to the forums "K" and thanks for sharing your knowledge.
__________________
Please Visit - Weasel Brand Game Calls and Accessories
Reply With Quote
  #7  
Old 01-11-2010, 01:42 PM
Campbery's Avatar
Campbery Campbery is offline
Junior Member
 
Join Date: Jan 2010
Location: Bruce Co., Ontario, Canada
Posts: 2
Default

I am having the same issue but with a 1GB micro SD card. The programming utility actually wouldn't recoginize it until I renamed it "FX3", a foxpro customer service recommendation as "SP1" didn't work.
BUT my new card still won't patch to the remote. Have formatted it a couple different ways and the sounds go on it no problem but it won't transfer to the Spitfire remote. Any ideas? Thanks.
__________________
"Life is full of wonderful opportunities brilliantly disguised as insolvable problems."

Last edited by Campbery; 01-11-2010 at 03:56 PM.
Reply With Quote
  #8  
Old 01-29-2010, 10:53 PM
shadowchaser shadowchaser is offline
Junior Member
 
Join Date: Dec 2009
Location: montrose,pa
Posts: 5
Default

................

Last edited by shadowchaser; 01-29-2010 at 10:59 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:24 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
vBulletin Skin by vBSkins.com
Customized for FOXPRO Inc.